sales@gbic.ph
8244-8412/8244-8413
941 Benavidez St. Binondo Manila
For Wholesale & Customer Support, contact us directly through 8244-8412
At some point, the bearing will reach the end of its service life and will have to be replaced. Although the bearing may not be used again, it is extremely important to dismount it correctly so that the service life of the placement bearing is not compromised. Firstly, the use of proper dismounting methods tools will help prevent damage to other machine components, such as the shaft and housing, which are often re-used.Secondly, incorrect dismounting techniques can be hazardous to maintenance personnel.
SKF Bearing Fitting Tool Kits are designed for quick and precise mounting of bearings, while minimising the risk of bearing damage.
The HN series includes 15 different size hook spanners based on the DIN 1810 standard. The hook spanners are designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN 981 standard.
The hook spanners of HN ../SNL series are especially designed to facilitate easy and quick mounting and dismounting of bearings with tapered bore on adapter sleeve in SKF SNL and FSNL bearing housings.
The SKF Adjustable Hook Spanners HNA series facilitate the easy and safe tightening and loosening of KM, KML, N, AN, KMK, KMFE and KMT nuts. The spanners are made of special hardened steel for durability.
SKF axial lock nut sockets are designed for safe and easy tightening and loosening of lock nuts. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
SKF impact spanners are designed for safely tightening and loosening larger locknuts, especially after driving up a large bearing onto a tapered seating. They are not intended to be used to drive the bearing up a tapered seating.
The TMHN 7 set of lock nut spanners is especially designed for mounting self�aligning ball bearings as well as small spherical roller and CARB� bearings on tapered seatings.
The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable.
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity.
The SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range.
The SKF portable induction heater TWIM 15 is designed to heat up roller bearings that are mounted with an interference fit onto a shaft.
A well-designed belt drive will transmit power for many years with minimal maintenance. As such, investing in high quality belts reduces the total cost of ownership of your machinery in the long-run.
Belt performance is highly dependant on pulley performance. High quality pulleys significantly increase belt life and reduce the total cost of ownership of your machinery.
A well-designed chain drive transmits mechanical power from one shaft to another efficiently.
Our sprockets are available in many sizes, to fit a variety of design envelopes and avoid the need for customised parts.
We offer all the main types, including grid, gear, flex and jaw couplings. In addition we supply OK couplings, which use oil injection for mounting and dismounting, and flexible shaft couplings.
Grid Couplings are an excellent choice for high output (kW) and high torque applications where vibration, shock loads and misalignment occur.
When using the OK couplings for shaft connections, advantage is taken of the powerful oil injection method.
Hydraulic seals are used hydraulic in cylinders to seal the openings between various components in the hydraulic cylinder.
Power transmission seals are intended for the sealing of openings between a rotating and a stationary component of between two components in relative motion.
Deep groove ball bearings are the most widely used bearing type and are particularly versatile.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring.
-design-with-J-cage.png)
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis.
Insert bearings are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
Thrust ball bearings are manufactured as single direction or double direction thrust ball bearings.
These robust bearings can accommodate with very heavy radial and axial loads in applications prone to misalignment or shaft deflections.
Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes.
Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and cage.
Spherical roller thrust bearings have specially designed raceways and asymmetrical rollers.
Needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length.
CARB toroidal roller bearings* have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles.
Bearings designed to accommodate heavy axial loads and peak loads and to provide optimal load distribution. Very stiff and require little axial space.
Bearing housings support your bearings, protect them from contaminants while keeping in lubricant, and can also house monitoring equipment.
Because of their versatility and cost-effectiveness, ball bearing units are typically used in many industrial applications.
The handheld SKF Machine Condition Advisor (MCA) puts the benefits of machine monitoring within reach for any maintenance and operations teams.
The SKF Microlog GX series are high performance, one to four channel, route-based portable data collector / FFT analyzers that provide unmatched versatility and functionality in a rugged, industrial design.
The SKF Microlog Analyzer AX is the most advanced large screen route based analyzer offered by SKF today.
Basic stroboscope for visual inspection of running machines
Compact easy-to-use stroboscope with 7 ultra-bright LEDs
Compact advanced stroboscope with 6 ultra-bright LED's and laser tachometer
Stroboscope with 118 ultra-bright LEDs
SKF Endoscopes TKES 10 series are first line inspection tools that can be used for internal inspection of machinery.
The SKF TKRT 10 is a fast and accurate tachometer utilizing laser or contact to measure rotational and linear speeds.
The Multi-functional digital tachometer TKRT 20 is a user-friendly and accurate digital tachometer utilising laser or contact for measuring rotational and linear speed.
The SKF TMSP 1 is a high quality, hand-held instrument for measuring the sound level in decibels.
The SKF TKSU 10 is an ultrasonic leak detector that helps users to quickly find leakages in compressed air or vacuum systems.
The SKF TKSU 10 is an ultrasonic leak detector that helps users to quickly find leakages in compressed air or vacuum systems.
The SKF Electrical Discharge Detector Pen (EDD Pen) is a simple to use hand-held instrument for detecting electrical discharges in electric motor bearings
Small and medium size bearings are generally cold mounted. Traditional methods can cause forces to be transmitted through the rolling elements, resulting in damage to the raceways. SKF’s mechanical mounting tools help prevent bearing damage during cold mounting.
The TKSA 31 is SKF's most affordable solution for easy laser shaft alignment.
The TKSA 41 is an advanced laser alignment solution for achieving accurate shaft alignments.
The TKSA 51 shaft alignment tool provides high measurement flexibility and performance suitable for entry-level to expert alignment jobs.
.png){kind=spacer}
Designed for professional alignment in harsh industrial environments, the TKSA 71 complements SKF's offering with a high-end shaft alignment tool.
One of the common reasons for unplanned downtime of belt-driven machinery is pulley misalignment. Pulley misalignment can increase wear on pulleys and belts as well as increasing the noise and vibration level, that can result in unplanned machinery downtime. Another side effect of increased vibration is premature bearing failure. This too can cause unplanned machinery downtime.
The SKF TKBA 40 aligns V-belt pulleys in the grooves. V-guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley.
A simple accessory for vertical machinery alignment.
Accurate machine adjustment is an essential element of any alignment process.
SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent thermal stability within its operating temperature range.
SKF LGMT 3 is mineral oil based, lithium soap thickened grease.
SKF LGEP 2 is mineral oil based, lithium soap thickened grease with extreme pressure additives.
SKF LGWA 2 is a premium quality mineral oil based, lithium complex grease with extreme pressure(EP) performance.
SKF LGGB 2 is a biodegradable, low toxicity, synthetic ester oil based grease, using a lithium-calcium thickener.
SKF LGBB 2 is a lithium complex/synthetic PAO oil based grease specially designed for extreme conditions involving very low speeds, high loads, low temperatures and oscillating conditions.
SKF LGLT 2 is a fully synthetic oil based grease using lithium soap.
SKF LGWM 1 is a low consistency mineral oil based grease, using a lithium soap and containing extreme pressure additives.
SKF LGWM 2 is a synthetic-mineral oil based grease using the latest complex calcium sulphonate thickener technology.
SKF LGEM 2 is a high viscosity, mineral oil based grease using a lithium/calcium soap.
SKF LGEV 2 is a mineral oil based grease, using a lithium-calcium soap.
SKF LGHB 2 is a high viscosity, mineral oil based grease, using the latest complex calcium-sulphonate soap technology.
LGHC 2 is a mineral oil based grease based on calcium sulphonate complex technology.
SKF LGHP 2 is a premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener.
SKF LGET 2 is a synthetic fluorinated oil based grease, using a PTFE thickener.
SKF LEGE 2 grease combines a fully synthetic ester oil with a unique lithium soap thickener.
SKF LGFQ 2 is a synthetic oil based grease using the latest complex calcium sulphonate thickener technology.
SKF LGED 2 is a food grade NSF H1 certified grease based on a synthetic fluorinated oil using a PTFE thickener.
The SKF Grease Guns are ideal for agricultural, industrial and construction industries and for private use.
Developed for maximum efficiency, the SKF Battery Driven Grease Gun TLGB 20 includes an integrated grease meter to help prevent over- and under-lubrication.
SKF manual and air-operated grease pumps are designed to supply large amounts of grease.
The units are supplied ready-to-use straight from the box and filled with a wide range of high performance SKF lubricants.
The SKF Automatic Lubricant Dispenser – TLMR – is a single point automatic lubricator designed to supply grease to a single lubrication point.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
One of the most common ways to dismount small to medium size bearings is to use a basicmechanical puller. Using an SKF puller helps to safeguard against damage to the bearing or to thebearing seating during dismounting.
The multi-purpose SKF Reversible jaw pullers are suitable for internal and external pulling of bearings and other components.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market.
The SKF TMMP heavy duty jaw pullers provide perfect alignment and shaft protection as well as an exceptional grip for medium to large size bearings.
The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces of puller power and safety.
The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US).
The puller is suitable for use in both blind housings and shaft applications. The SKF TMMD 100is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaftdiameters ranging between 10 and 100 mm (0.4–3.9 in.).
The SKF TMBS E strong back pullers facilitate dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach.
The TMBP 20E is an adapter type puller for dismounting deep groove ball bearings in blind housings with shaft dimensions between 30 mm and 160 mm.
The puller is suitable for use in both blind housings and shaft applications. The SKF TMMD 100is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaftdiameters ranging between 10 and 100 mm (0.4–3.9 in.).
Comes in TMIP and TMIC Series. Supplied in a sturdy carrying case.
.png)
