Equipped with spring-operated arms and a solid design, the SKF EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement.

Mechanical pullers TMMA series

• Sturdy design allows dismounting of components even in the tightest
application in a safe manner
• The unique red rings spring-operated opening mechanism allows the
SKF EasyPull to be placed behind the component with one movement
of the hands
• Self-locking arms help prevent the risk of puller slipping under load
• Double hexagonal heads allow easier application of withdrawal force
• Self-centring capability and nosepiece help avoid damage to shaft
• Efficient use of time due to quick dismounting
• Available in three sizes with a withdrawal force of 60, 80 or 120 kN
(6.7, 9.0 or 13.5 US ton), enabling easy selection
• TMHS series hydraulic force generators are available as an accessory
for the 80 and 120 kN versions
• Supplied with a tube of puller spindle grease (LGEV 2)

Hydraulic pullers TMMA _H series

• Ready-to-use, integrated hydraulic cylinder, pump and puller – thus
it is assembly-free and it is not necessary to purchase separate parts
• Safety valve prevents spindles and pullers from being overloaded if
excessive force is applied
• The spring-loaded centre point on the hydraulic spindle allows easy
centring of the puller on the shaft without damaging the shaft
• The TMMA 100H has a maximum withdrawal force of 100 kN
(11.2 US ton) and a long stroke of 80 mm (3.1 in.), which facilitates
most dismounting jobs in just one operation
• For dismounting jobs requiring less force, SKF offers a 75 kN
(8.4 US ton) version, the hydraulic EasyPull TMMA 75H with a
maximum stroke of 75 mm (3 in.)
• Supplied with extension pieces and one nosepiece

Also available as puller sets (TMMA_H/SET Series):

• A set consisting of a hydraulically assisted SKF EasyPull together with a
tri-section pulling plate, TMMS series, and a puller protection blanket
facilitate an easy, safe and virtually damage-free dismounting
• Especially suitable for dismounting spherical roller and CARB toroidal
roller bearings, and other components such as pulleys and flywheels
• A puller protection blanket, TMMX series, made of a strong transparent
material allows the user to visually follow the dismounting procedure.
While dismounting, the blanket helps to protect from flying fragments of
bearings or other components, thereby enhancing user safety
• A sturdy custom-made storage case with room for all parts minimises
the risk of loosing or damaging the set’s components